Maytag W105623338C-SP Cycle Guide Timed Cycles, Cycle Guide Steam Cycles, Available Options

CYCLE GUIDE – TIMED CYCLES

Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models. Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.

Adjusting drying time on Timed Cycles

When you select a Timed Cycle,

the default time appears in the display. Use the + and – buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments.

The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a no heat (Air Only) setting for foam, rubber, plastic, or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

Items to dry:	Cycle:	Drying	Default
		Temperature:	Time:
Any load	Timed Dry	High	40
NOTE: Select Air Only		Medium
to dry foam, rubber,		Low
plastic, or heat-sensitive		Extra Low
fabrics		Air Only
Small loads and	Small Load		18
sportswear
Small to lightweight	Freshen Up	High	20
medium loads	(for non-steam	Medium
	models)	Low
		Extra Low
		Air Only

Available

Options:

Wrinkle Prevent†

Cycle Details:

Use to dry items to a damp level for items that do not require an entire drying cycle. Select a drying termperature based on the type of fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting.

For small loads of 3–4 items.

Use for drying or freshening small to lightweight medium loads.

†Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings.

CYCLE GUIDE – STEAM CYCLES

Settings and options shown in bold are default settings for that cycle. Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Items to refresh:	Cycle:	Drying	Default
		Temperature:	Time:
Mixed loads	Custom Refresh	Medium	14
	(on some models)
Shirts, blouses, and	Auto Refresh	High	22
slacks		Medium

Available

Options:

Wrinkle Prevent†

Reduce Static

Cycle Details:

This cycle is best for reducing wrinkles and odors from dry garments. Select the number of garments to be refreshed. Cycle time will increase depending on number of garments selected.

Use to reduce light wrinkles from small to medium- sized loads of dry items. Dry time will automatically adjust when the load size is sensed. Cycle run time cannot be manually adjusted. Temperature

is selectable. Do not add dryer sheets.

†Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings.

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle.

Small load: Fill the dryer drum with 3–4 items, not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full. Do not overload. Items need to tumble freely.

8