Maytag YMHWE201 Cycle Guide - Special-Purpose Cycles, Load Size Recommendations, Items to wash

CYCLE GUIDE — SPECIAL-PURPOSE CYCLES

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models.

For best performance, not all settings are available with each cycle, and some options cannot be used together.

Items to wash	Cycle:	Wash	Spin	Soil	Available	Cycle Details:
using default cycle		Temp.*:	Speed:	Level:	Options:
settings:
Swimwear, items that	Rinse/Drain	Cold	Ex High		Delay Start	This cycle adds water followed by a
need rinsing only.	& Spin		High		2nd Rinse	high-speed tumbling. For some fabrics
			Medium		Cycle Signal	you may wish to set the spin speed to
			Low		Fresh Spin™	a lower setting.
Wet load of clothes	Rinse/Drain	N/A	Ex High		Delay Start	To use Rinse/Drain & Spin deselect 2nd
	& Spin		High		2nd Rinse	Rinse option. Use this cycle to get water
			Medium		Cycle Signal	extracted from clothes or you want
			Low		Fresh Spin™	additional extraction on a washed load.
						Using Drain & Spin. Use this cycle with
						medium and large loads.
All loads	Soak	Warm	No Spin		Delay Start	This cycle provides a soak with short
		Cold			Cycle Signal	tumbling phase and a soaking time
						that help improve the removal of stains,
						without drum followed by drain. Drain
						without spin assures gentle treatment.
No clothes in washer	Clean	N/A	High		Delay Start	Use this cycle every 30 washes to keep the
	Washer with				Cycle Signal	inside of your washer fresh and clean. This
	affresh®					cycle uses a higher water level. Use with
						affresh® Washer Cleaner tablet or liquid chlorine
						bleach to thoroughly clean the inside of your
						washer. This cycle should not be interrupted.
						See “Washer Care.”
						IMPORTANT: Do not place garments or other
						items in the washer during the Clean Washer
						with affresh® cycle. Use this cycle with an
						empty wash tub.

* All temperature selections feature a cold rinse.

Load Size Recommendations

NOTE: A single item, bulky items, or tightly packing may cause imbalance. Add items or try to evenly distribute wet laundry in the drum, and start a Rinse/Drain & Spin cycle. If the laundry is still wet, take half of the load out of the washer and try again.

For best results, follow the load size recommendations noted for each cycle. Small load: Fill the washer drum with 3-5 items, not more than 1/4 full.

Medium load: Fill the washer drum up to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.

For best results, avoid packing tightly.

8