Melitta 2954076 manual Refill milk

OPERATION

	5.5.4	Refill milk
	The description of the procedure below ap-
E	plies to both the installed EF milk cooler
	and the external FC milk cooler.

! The installed EF milk cooler can option- ally be fitted with a milk level monitoring system.

CAUTION

•If the milk container is emp- ty:

the addition of steam in- stead of milk to beverages can result in splashing of hot liquid, causing scalds.

NOTE

•The milk container for the in- stalled EF milk cooler holds ap- prox. six litres of milk.

•If the installed EF milk cooler is fitted with milk level monitor- ing, then this will be activated when the milk supply in the milk container has dropped to about 1 litre or when the milk container is not in the installed EF milk cooler.

•When replenishing the milk supply, always cover the lip seals of the milk cooler door of the installed EF milk cooler.

•The milk used to replenish the milk container must be pre-cooled, i.e. it must not be any hotter than 1 - 5 °C. If hotter milk is used, the milk will overheat when "milky coffee" beverages are dis- pensed, insufficient froth will be created and it will not be possible to comply with the hygiene regulations.

•If the milk container is empty when the machine comes to dispense beverages that in- clude milk, the c5 coffee maker will dispense steam instead of milk.

•Replenish the milk supply immediately.

1.The following message indicates that there is either no milk or insufficient milk or else that the milk container itself is not inside the installed EF milk cooler ...

Select beverage

Refill milk

2.Replenish milk supply. This will result in the following message ...

Select beverage

3.Pull beverage outlet right down.

4.Open control panel cover and press the [ ∃ ] button.

Please wait

A little milk will be released to fill the lines.

5.You can now dispense beverages as required.

© Cafina / Melitta 5 - 22 OI c5 eng V9 / 18.08.2006