Care and cleaning
1C aution: To prevent electrical shock, unplug the unit before cleaning.
2Wait until the breadmaker has cooled.
•IMPORTANT: Do not immerse or splash either the body or lid in any liquid as this may cause damage and/or electric shock.
3Exterior: Wipe the lid and outer body of the unit with a damp cloth or slightly dampened sponge.
4Interior: Use a damp cloth or sponge to wipe the interior of the breadmaker.
5Baking pan: Clean the baking pan with warm water, soap is not necessary. Avoid scratching the
•Do not wash the baking pan, measuring cup, spoon or kneading blades in the dishwasher.
•Do not soak the baking pan for long periods as this could interfere with the working of the drive shaft.
•If the paddle becomes stuck in the bread pan, pour hot water over it and allow to soak for 30 minutes. This will enable you to remove the paddle more easily.
•Be sure the appliance is completely cooled before storing away.
Do not use any of these when cleaning
•Paint thinner
•Benzine
•Steel wool pads
•Polishing powder
•Chemical dustcloth
Special care for the non-stick finish
Avoid damaging the coating. Do not use metal utensils such as spatulas, knives or forks.
The coating may change colour after long use, this is only caused by moisture and steam and will not affect the performance of the unit or quality of your bread.
The hole in the centre of the kneading blade shoud be cleaned, then add a drop of cooking oil and replace it on the spindle in the baking pan. This will prevent sticking of the blade.
•Keep all air vents and openings clear of dust.
Storing the unit
Be sure to dry all parts before storing including wiping any moisture from the viewing window. Close the lid and do not store anything on top of the lid.
10
MW_CObm26500_Mabaker_IM.indd 10
12/15/2008 1:53:47 PM
