Memorex MLT1912 manual Connection Using S-VIDEO Cable, Cables not Included

Jack panel is shown on its side. Top of panel is this side.

CONNECTION USING S-VIDEO CABLE:

Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable.

(CABLES NOT INCLUDED.)

	1.	Connect the cable, satellite or incoming
		antenna to the ANT jack on the rear of
	2.	the VCR.
		Connect the left and right audio cable from
		the VCR’s AUDIO OUT jacks to the TV’s
	3.	left and right AUDIO IN jacks.
		Connect the VCR’s S-VIDEO OUT jack to
	4.	the TV’s S-VIDEO IN jack.
		Press the SOURCE button until S-VIDEO
Jack panel is shown		appears on the TV screen and press PLAY
		on the VCR to watch a tape.
on its side. Top of	NOTE: Side panel is accessible by pressing in
panel is this side.
	on the tabs, then lift the side cover off. After
	connections have been made, slide the wires
	through the bottom opening of the cover and
	replace cover.

DVD CONNECTIONS

CONNECTION USING AUDIO/VIDEO CABLES:

Follow the instructions below to connect a DVD player to your television using Audio/Video cables.

(CABLES NOT INCLUDED.)

1. Connect the left and right audio cable from the DVD’s AUDIO OUT jacks to the TV’s left and right AUDIO IN jacks. Connect the DVD’s VIDEO OUT jack to the TV’s VIDEO IN jack.

2. Press the SOURCE button until AV appears on the TV screen and press PLAY on the DVD to watch a DVD.

NOTE: Side panel is accessible by pressing in on the tabs, then lift the side cover off. After connections have been made, slide the wires through the bottom opening of the cover and replace cover.

11