SETTING CHANNELS INTO MEMORY |
|
| |
1 | 1 | 3 | |
| |||
2 | 2 | ||
| |||
3 |
|
| |
Press the STANDBY button 1 to turn on the TV; the | Select Setup using the CHANNEL/Navigation UP 1 or | ||
STANDBY indicator will turn off. Press the SOURCE button | DOWN 2 button, then press the VOLUME UP/Navigation | ||
2 to select the desired mode, TV (NTSC) or ATSC. Set the | Right button 3 to select it. Select Preset using the | ||
desired reception mode (TV/CATV) as described on the | CHANNEL/Navigation UP 1 or DOWN 2 button, then | ||
previous page. Press the MENU button 3; the Main Menu | press the VOLUME UP/Navigation Right button 3 to | ||
screen will appear. | select it. |
| |
1 | 3 | |
2 | ||
|
Select AUTO INSTALL using the CHANNEL/Navigation UP
or DOWN button, then press the VOLUME
UP/Navigation1 Right2 button ; the TV will automatically cycle through all the channels3 and store active channels into memory.
To Cancel AUTO INSTALL, press the MENU button 4.
Press the MENU button repeatedly when finished or wait approx. 10 seconds to exit the menus.
NOTES:
• If no buttons are pressed for approx. 10 seconds, the menu will disappear automatically.
• Searching for ATSC channels may take 15 minutes or more to complete. A progress status is displayed while the channel list is being created.
• The TV will only search for the NTSC channels while in TV (NTSC) mode or it will just search for ATSC channels while in ATSC mode.
17
