Delta Electronics VFD-EL manual Parameter, Explanation, Settings, Factory, Customer

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
01.04	Mid-Point Voltage	115V/230V series: 0.1V to 255.0V	10.0
	(Vmid)	460V series: 0.1V to 510.0V	20.0
01.05	Minimum Output	0.10 to 600.0 Hz	1.50
	Frequency (Fmin)
01.06	Minimum Output	115V/230V series: 0.1V to 255.0V	10.0
	Voltage (Vmin)	460V series: 0.1V to 510.0V	20.0
01.07	Output Frequency	0.1 to 120.0%	110.0
	Upper Limit
01.08	Output Frequency	0.0 to100.0 %	0.0
	Lower Limit
01.09	Accel Time 1	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.10	Decel Time 1	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.11	Accel Time 2	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.12	Decel Time 2	0.1 to 600.0 / 0.01 to 600.0 sec	10.0
01.13	Jog Acceleration	0.1 to 600.0 / 0.01 to 600.0 sec	1.0
	Time
01.14	Jog Deceleration	0.1 to 600.0 / 0.01 to 600.0 sec	1.0
	Time
01.15	Jog Frequency	0.10 Hz to Fmax (Pr.01.00) Hz	6.00
		0: Linear Accel/Decel
	Auto acceleration /	1: Auto Accel, Linear Decel
01.16	deceleration (refer	2: Linear Accel, Auto Decel	0
	to Accel/Decel time
		3: Auto Accel/Decel (Set by load)
	setting)
		4: Auto Accel/Decel (set by Accel/Decel
		Time setting)
01.17	Acceleration S-	0.0 to 10.0 / 0.00 to 10.00 sec	0.0
	Curve
01.18	Deceleration S-	0.0 to 10.0 / 0.00 to 10.00 sec	0.0
	Curve
01.19	Accel/Decel Time	0: Unit: 0.1 sec	0
	Unit	1: Unit: 0.01 sec

4-4 Revision August 2008, 2ELE, V1.02