Delta Electronics VFD-EL Group 2 Operation Method Parameters, Explanation, Settings, Factory

		Chapter 4 Parameters
Group 2 Operation Method Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: Digital keypad UP/DOWN keys or Multi-
		function Inputs UP/DOWN. Last used
02.00	Source of First	frequency saved.	1
	Master Frequency	1: 0 to +10V from AVI
	Command
		2: 4 to 20mA from ACI
		3: RS-485 (RJ-45) communication
		4: Digital keypad potentiometer
		0: Digital keypad
		1: External terminals. Keypad STOP/RESET
		enabled.
	Source of First	2: External terminals. Keypad STOP/RESET
02.01	Operation	disabled.	1
	Command	3: RS-485 (RJ-45) communication. Keypad
		STOP/RESET enabled.
		4: RS-485 (RJ-45) communication. Keypad
		STOP/RESET disabled.
		0: STOP: ramp to stop; E.F.: coast to stop
02.02	Stop Method	1: STOP: coast to stop; E.F.: coast to stop	0
		2: STOP: ramp to stop; E.F.: ramp to stop
		3: STOP: coast to stop; E.F.: ramp to stop
	PWM Carrier
02.03	Frequency	2 to 12kHz	8
	Selections
		0: Enable forward/reverse operation
02.04	Motor Direction	1: Disable reverse operation	0
	Control
		2: Disabled forward operation
02.05	Line Start Lockout	0: Disable. Operation status is not changed	1
		even if operation command source Pr.02.01
		is changed.
		1: Enable. Operation status is not changed
		even if operation command source Pr.02.01
		is changed.
		2: Disable. Operation status will change if
		operation command source Pr.02.01 is
		changed.

Revision August 2008, 2ELE, V1.02 4-5