Delta Electronics VFD-EL Keypad and Start Up, Description of the Digital Keypad, Status Display

Chapter 3 Keypad and Start Up

3.1 Description of the Digital Keypad

1 2

3

46

5

7

1	Status Display	5	UP and DOWN Key
	Display the driver's current status.		Set the parameter number and changes the
			numerical data, such as Master Frequency.
2	LED Display	6	MODE
	Indicates frequency, voltage, current, user		Change between different display mode.
	defined units and etc.

3Potentiometer

For master Frequency setting.

4RUN Key

Start AC drive operation.

7STOP/RESET

Stops AC drive operation and reset the drive after fault occurred.

There are four LEDs on the keypad:

LED STOP: It will light up when the motor is stop.

LED RUN: It will light up when the motor is running.

LED FWD: It will light up when the motor is forward running.

LED REV: It will light up when the motor is reverse running.

Revision August 2008, 2ELE, V1.02 3-1