Delta Electronics VFD-EL manual Parameter Explanation Settings Factory

		Chapter 4 Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
08.17	Auto Energy Saving	0: Disable	0
		1: Enable
		0: AVR function enable
08.18	AVR Function	1: AVR function disable	0
		2: AVR function disable for decel.
		3: AVR function disable for stop
08.19	Reserved
	Compensation	0.0~5.0	0.0
08.20	Coefficient for Motor
	Instability
Group 9 Communication Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
09.00	Communication	1 to 254	1
	Address
		0: Baud rate 4800bps
09.01	Transmission Speed	1: Baud rate 9600bps	1
		2: Baud rate 19200bps
		3: Baud rate 38400bps
		0: Warn and keep operating
09.02	Transmission Fault	1: Warn and ramp to stop	3
	Treatment	2: Warn and coast to stop
		3: No warning and keep operating
09.03	Time-out Detection	0.1 ~ 120.0 seconds	0.0
		0.0: Disable
09.04	Communication	0: 7,N,2 (Modbus, ASCII)	0
	Protocol	1: 7,E,1 (Modbus, ASCII)
		2: 7,O,1 (Modbus, ASCII)
		3: 8,N,2 (Modbus, RTU)

Revision August 2008, 2ELE, V1.02 4-17