Delta Electronics VFD-EL manual Parameter, Explanation, Settings, Factory, Customer

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
04.08	Multi-function Input	9: External base block	4
	Terminal (MI6)	10: Up: Increment master frequency
		11: Down: Decrement master frequency
		12: Counter Trigger Signal
		13: Counter reset
		14: E.F. External Fault Input
		15: PID function disabled
		16: Output shutoff stop
		17: Parameter lock enable
		18: Operation command selection (external
		terminals)
		19: Operation command selection(keypad)
		20: Operation command
		selection(communication)
		21: FWD/REV command
		22: Source of second frequency command
		Bit0:MI1
		Bit1:MI2
		Bit2:MI3
	Multi-function Input	Bit3:MI4
04.09		Bit4:MI5	0
	Contact Selection
		Bit5:MI6
		0:N.O., 1:N.C.
		P.S.:MI1 to MI3 will be invalid when it is 3-
		wire control.
	Digital Terminal
04.10	Input Debouncing	1 to 20 (*2ms)	1
	Time
04.11	Min AVI Voltage	0.0 to 10.0V	0.0
04.12	Min AVI Frequency	0.0 to 100.0%	0.0
04.13	Max AVI Voltage	0.0 to 10.0V	10.0
04.14	Max AVI Frequency	0.0 to 100.0%	100.0

4-10 Revision August 2008, 2ELE, V1.02