Delta Electronics VFD-EL manual PU06 Description of the Digital Keypad VFD-PU06

Appendix B Accessories

B.7 PU06

B.7.1 Description of the Digital Keypad VFD-PU06

Frequency Command

Status indicator

Output Frequency

Status indicator

User Defined Units

Status indicator

JOG

By pressing JOG key, Jog frequency operation.

UP and DOWN Key

Set the parameter number and changes the numerical data, such as Master Frequency.

Left Key

Move cursor to the left.

FWD/REV Key

Select FWD/REV operation.

		LED Display
		Indicates frequency, voltage, current, user
F		defined units, read, and save, etc.
H		Model Number
U
	VFD-PU06	Status Display
	EXT PU	Display the driver's current status.
		MODE
JOG	PU	Change between different display mode.
		Right key
		Move the cursor to the right
RUN	STOP	STOP/RESET
	RESET	Stops AC drive operation and reset the drive
		after fault occurred.
		RUN Key
		Start AC drive operation.

B.7.2 Explanation of Display Message

Display Message Descriptions

The AC motor drive Master Frequency Command.

The Actual Operation Frequency present at terminals U, V, and W.

The custom unit (u)

The output current present at terminals U, V, and W.

Press to change the mode to READ. Press PROG/DATA for about 2 sec or until it’s flashing, read the parameters of AC drive to the digital keypad PU06. It can read 4 groups of parameters to PU06. (read 0 – read 3)

Press to change the mode to SAVE. Press PROG/DATA for about 2 sec or until it’s flashing, then write the parameters from the digital keypad PU06 to AC drive. If it has saved, it will show the type of AC motor drive.

B-14 Revision August 2008, 2ELE, V1.02