Delta Electronics VFD-EL manual Motor Direction Control Factory Setting

Rated Current (%)

100%							25℃ with mounting method B
90%							50℃ with mounting method A
80%
							40℃ with mounting method B
70%
60%
50%
40%							Carrier
	2kHz		6kHz		10kHz		Frequency
		4kHz		8kHz		12kHz

For 460V Series

Chapter 4 Parameters

	100%				35℃ with mounting method A
					25℃ with mounting method B
(%)	90%				50℃ with mounting method A
	80%				40℃ with mounting method B
Current
	70%
Rated	60%
	50%
	40%
					Carrier
	2kHz	6kHz	10kHz		Frequency
	4kHz		8kHz	12kHz

For 115V/230V Series

02.04Motor Direction Control

Factory Setting: 0

Settings	0	Forward/Reverse operation enabled
	1	Reverse operation disabled
	2	Forward operation disabled

This parameter is used to disable one direction of rotation of the AC motor drive direction of

rotation.

02.05Line Start Lockout

		Factory Setting: 1
Settings	0	Disable. Operation status is not changed even if operation
		command source Pr.02.01 is changed.
	1	Enable. Operation status is not changed even if operation command
		source Pr.02.01 is changed.
	2	Disable. Operation status will change if operation command source
		Pr.02.01 is changed.
	3	Enable. Operation status will change if operation command source
		Pr.02.01 is changed.

This parameter determines the response of the drive upon power on and operation command

source is changed.

Pr.02.05	Start lockout (Run when power is ON)	Operation status when operation
		command source is changed
0	Disable (AC motor drive will run)	Keep previous status
1	Enable (AC motor drive doesn’t run)	Keep previous status
2	Disable (AC motor drive will run)	Change according to the new
		operation command source
3	Enable (AC motor drive doesn’t run)	Change according to the new
		operation command source

Revision August 2008, 2ELE, V1.02 4-41