Delta Electronics VFD-EL manual Parameter Explanation Settings Factory Customer

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
		4: 8,E,1 (Modbus, RTU)
		5: 8,O,1 (Modbus, RTU)
		6: 8,N,1 (Modbus, RTU)
		7: 8,E,2 (Modbus, RTU)
		8: 8,O,2 (Modbus, RTU)
		9: 7,N,1 (Modbus, ASCII)
		10: 7,E,2 (Modbus, ASCII)
		11: 7,O,2 (Modbus, ASCII)
09.05	Reserved
09.06	Reserved
09.07	Response Delay	0 ~ 200 (unit: 2ms)	1
	Time
Group 10 PID Control Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
		0: Disable PID operation
		1: Keypad (based on Pr.02.00)
10.00	PID Set Point	2: 0 to +10V from AVI	0
	Selection
		3: 4 to 20mA from ACI
		4: PID set point (Pr.10.11)
		0: Positive PID feedback from external
		terminal AVI (0 ~ +10VDC)
		1: Negative PID feedback from external
10.01	Input Terminal for	terminal AVI (0 ~ +10VDC)	0
	PID Feedback	2: Positive PID feedback from external
		terminal ACI (4 ~ 20mA)
		3: Negative PID feedback from external
		terminal ACI (4 ~ 20mA)
10.02	Proportional Gain	0.0 to 10.0	1.0
	(P)
10.03	Integral Time (I)	0.00 to 100.0 sec (0.00=disable)	1.00

4-18 Revision August 2008, 2ELE, V1.02