Magnavox MDV630R manual Picture settings, Sound settings, Use devices with an analog audio input

Picture settings

You can select the following functions in this menu:

'TV shape'

ENGLISH

The picture signal can be adjusted to fit your TV:

'4:3 letterbox' for a 'wide-screen' display with black bars on the top and bottom

'4:3 panscan' for a full-height picture with the sides trimmed

'16:9' for wide-screen TV

'Black level shift'

Adapts the color dynamic for NTSC playback when set to ON.

'Video shift'

This allows you to move the picture left or right using the D , C buttons in order to adjust the picture to your TV screen.

Sound settings

Depending on the audio outputs being used, this menu provides you with a selection of settings. If you are only using the analog audio outputs (red and white AUDIO OUT L/R), select 'Off' in the 'Digital output' menu.

'Digital output'

You can select from the following settings for devices connected to the DIGITAL AUDIO OUT jack.

'All': Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2

Multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers with a digital Multi sound decoder	.

'PCM only' : Dolby Digital and MPEG-2 Multi-channel signals are converted to PCM (Pulse Code

Modulation).
Use receivers/amplifiers without a digital Multi sound decoder	.
'Off' : digital output turned off.
Use devices with an analog audio input.

TV shape Black level shift Video shift

Digital output Analog output Night mode

Picture

16:9

Off

ï

Sound

All

Stereo

Off

User preferences 73