9Wait until all available TV channels have been found. This can take several minutes.

10 As soon as the automatic TV channel search is completed, 'Auto ch. search complete' will appear on the TV screen along with the number of channels found.

11 To remove the menus, press the SYSTEM-MENUbutton on the Recorder's remote control.

The initial installation is now complete.

Automatic TV channel search

During installation, all available TV channels are searched for and saved. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving, you can start this procedure again. This will replace the TV channels already saved with the new ones.

1Switch on the TV. If required, select the channel number for the DVD recorder (channel 3 or 4 or the Audio/Video In channel).

2Turn on the DVD recorder by pressing STANDBY/ON .

3Press SYSTEM-MENUon the remote control. The menu bar will appear at the top of the TV screen.

4Select 'A' using D or C .

5Press B continuously to select the line 'Installation'. (It is on the second screen of menus.) Confirm with C .

6Select line 'Auto Ch. Programming' using B or A .

7Press C . The automatic TV channel search starts. This allows the DVD recorder to save all available TV channels. This

procedure may take several minutes.

8When the channel search is completed, 'Auto ch. search complete' will appear on the TV screen.

9Press SYSTEM-MENUrepeatedly to remove all the menus from the screen.

Installation

Auto Ch. Programming

Searching for TV channels

000 Channels found

Please wait

32

Installing your DVD recorder

 

Page 34
Image 34
Magnavox MDV650R, MDV630R manual Automatic TV channel search