33
aVery few TV channels were found
bDuring 'Automatic channel search' the DVD recorder detects whether
an antenna or a cable TV signal is connected. If you have connected a
cable TV signal but found very few TV channels, you must search the
channels manually.
To do so, select 'Cable/Antenna' insted of line 'Auto Ch.
Programming' in step 6and confirm with C.
If you select 'Cable', channels 1-125 will be available. If you select
'Anten.', channels 2-69 will be available. Select your type of
connection by pressing Crepeatedly
'Anten.', 'Cable'orAuto.' automatically detects which one you have.
Confirm the setting with OK .
Press SYSTEM-MENUto go to the next menu. Press OK to start
channel search as prompted by the on-screen message. When the
channel search is complete, press SYSTEM-MENU repeatedly to
remove all the menus. Problem
You can read about how to search for a TV channel manually in the following section 'Adding
and clearing TV channels manually'.
Adding and deleting TV channels manually
1Turn on your TV. If required, select the TV's Audio/Video In (or
channel 3 or 4).
2Press STANDBYmto turn on the DVD recorder. Press the
SYSTEM-MENUbutton on the remote control. The menu bar
will appear on the TV screen.
3Select 'A' using Dor C.
4Press Brepeatedly Bto select 'Installation' and then press
C.
5Select line 'Add/Delete Channels' using Bor Athen press
C.
Installation
Add/DeleteChannels
...
• Channel001 Add
Channel002 Add
Channel003 Delete
Channel004 Delete
Channel005 Delete
Channel006 Delete
...
Toexit press
SYSTEMMENU
6Using Bor Aselect the TV channel that you want to delete
or add.
7Press Cor Dto choose 'Add'or'Delete'.
8Repeat steps 6to 7until you have added/deleted all the TV
channels you want.
9To save your channel selections, press OK .
ENGLISH
Installing your DVD recorder