31
InitialSetup
SubtitleLanguage
English
Español
Français
Português
Italiano
PressOK to continue
5Select the desired language for the subtitles by pressing Bor

A.

What is the language of the subtitles?
DVD subtitles will be in the selected language if it is available. If this
language is not available, subtitles will be in the first language on the
DVD. ?
6Confirm by pressing OK.
InitialSetup
TVShape
4:3letterbox
4:3panscan
16:9
PressOK to continue
7Select the desired screen format with Bor A. This setting

only functions if you have inserted a DVD recorded in this

format.

Which screen formats can I choose?
4:3 letterbox fora wide-screen display (theatrical format)with black
barsat the top and bottom of the picture.
4:3 panscan fora full-height picture with the sidestrimmed to fill you
TVscreen.
16:9 forwide-screen TV (16:9) aspect ratio ?
8Confirm by pressing OK.

After you connect the antenna (or cable TV signal, satellite

receiver, etc.) to the DVD recorder, press OK

Make sure the Cable TV signal is connected securely to the

Antenna jack on the rear of the DVD Recorder.

The automatic TV channel search starts. 'WAIT' will appear on the

display.

Installation
AutoCh. Programming
Searchingfor TV channels
000Channels found
Pleasewait
aDuring the channel search, if the DVD recorder does not find
any TV channels:
bSelect another channel on the TV. Do you see that channel on the TV
set?
If not, check the connections between the DVD recorder and the TV.
bPlease have patience.
The DVD recorder searches the entire frequency range in order to
find and save the largest possible number of TV channels. It is possible
that the TV channels in your country are broadcast in a higher
frequency range. As soon as this range is reached during the search,
the DVD recorder will find the TV channels.
bIf no antenna is connected, complete the basic settings and then, if
desired, start the automatic channel search (see section 'Automatic TV
channel search').
aThe DVD recorder finds very few/no channels during the
search.
bIt is possible that the automatic switching between antenna/cable does
not properly detect your TV signal. Read the section about how to
switch manually. Problem
ENGLISH
Installing your DVD recorder