Delta Electronics VFD-EL manual Parameter

		Chapter 4 Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
03.10	Reserved
03.11	Brake Release	0.00 to 20.00Hz	0.00
	Frequency
03.12	Brake Engage	0.00 to 20.00Hz	0.00
	Frequency
03.13	Display the Status of	Read only	##
	Relay
Group 4 Input Function Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
04.00	Keypad	0.0 to 100.0 %	0.0
	Potentiometer Bias
04.01	Keypad	0: Positive bias	00
	Potentiometer Bias	1: Negative bias
	Polarity
04.02	Keypad	0.1 to 200.0 %	100.0
	Potentiometer Gain
	Keypad	0: No negative bias command
	Potentiometer
04.03			0
	Negative Bias,
	Reverse Motion	1: Negative bias: REV motion enabled
	Enable/Disable
04.04	2-wire/3-wire	0: 2-wire: FWD/STOP, REV/STOP
	Operation Control	1: 2-wire: FWD/REV, RUN/STOP	0
	Modes
		2: 3-wire operation
04.05	Multi-function Input	0: No function	1
	Terminal (MI3)	1: Multi-Step speed command 1
		2: Multi-Step speed command 2
04.06	Multi-function Input	3: Multi-Step speed command 3	2
	Terminal (MI4)	4: Multi-Step speed command 4
		5: External reset
04.07	Multi-function Input	6: Accel/Decel inhibit	3
	Terminal (MI5)	7: Accel/Decel time selection command
		8: Jog Operation

Revision August 2008, 2ELE, V1.02 4-9