Delta Electronics VFD-EL manual Content

Content

		Chapter 4 Parameters
Address		Function
	28: IGBT Overheat (cF3.4)
	29: Reserved
	30: Reserved
	31: Reserved
	32: ACI signal error (AErr)
	33: Reserved
	34: Motor PTC overheat protection (PtC1)
	Status of AC drive
		00B: RUN LED is off, STOP LED is on (The AC
		motor Drive stops)
		01B: RUN LED blinks, STOP LED is on (When
	Bit 0-1	AC motor drive decelerates to stop)
		10B: RUN LED is on, STOP LED blinks (When
		AC motor drive is standby)
		11B: RUN LED is on, STOP LED is off (When AC
		motor drive runs)
	Bit 2	1: JOG command
	Bit 3-4	00B: FWD LED is on, REV LED is off (When AC
		motor drive runs forward)
2101H
		01B: FWD LED is on, REV LED blinks (When AC
		motor drive runs from reverse to forward)
		10B: FWD LED blinks, REV LED is on (When AC
		motor drive runs from forward to reverse)
		11B: FWD LED is off, REV LED is on (When AC
		motor drive runs reverse)
	Bit 5-7	Reserved
	Bit 8	1: Master frequency Controlled by communication
		interface
	Bit 9	1: Master frequency controlled by analog signal
	Bit 10	1: Operation command controlled by
		communication interface
	Bit 11-15	Reserved
2102H	Frequency command (F)
2103H	Output frequency (H)

Revision August 2008, 2ELE, V1.02 4-95