Delta Electronics VFD-EL manual Parameter Explanation Settings Factory Customer

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
08.02	DC Brake Time	0.0 to 60.0 sec	0.0
	during Stopping
08.03	Start-Point for DC	0.00 to 600.0Hz	0.00
	Brake
		0: Operation stops after momentary power
		loss
	Momentary Power	1: Operation continues after momentary
		power loss, speed search starts with the	0
08.04	Loss Operation
		Master Frequency reference value
	Selection
		2: Operation continues after momentary
		power loss, speed search starts with the
		minimum frequency
08.05	Maximum Allowable	0.1 to 5.0 sec	2.0
	Power Loss Time
		0: Disable speed search
08.06	Base-block Speed	1: Speed search starts with last frequency	1
	Search	command
		2: Starts with minimum output frequency
08.07	B.B. Time for Speed	0.1 to 5.0 sec	0.5
	Search
08.08	Current Limit for	30 to 200%	150
	Speed Search
08.09	Skip Frequency 1	0.00 to 600.0 Hz	0.00
	Upper Limit
08.10	Skip Frequency 1	0.00 to 600.0 Hz	0.00
	Lower Limit
08.11	Skip Frequency 2	0.00 to 600.0 Hz	0.00
	Upper Limit
08.12	Skip Frequency 2	0.00 to 600.0 Hz	0.00
	Lower Limit
08.13	Skip Frequency 3	0.00 to 600.0 Hz	0.00
	Upper Limit
08.14	Skip Frequency 3	0.00 to 600.0 Hz	0.00
	Lower Limit
08.15	Auto Restart After	0 to 10 (0=disable)	0
	Fault
08.16	Auto Reset Time at	0.1 to 6000 sec	60.0
	Restart after Fault

4-16 Revision August 2008, 2ELE, V1.02