Delta Electronics VFD-EL manual Reserved 00.11 00.12 50Hz Base Voltage Selection, 00.13, 00.14

Chapter 4 Parameters

00.10	Reserved
00.11	Reserved
00.12	50Hz Base Voltage Selection

Factory Setting: 0

Settings		0	230V/400V
		1	220V/380V
This parameter determines the base voltage for 50Hz.
00.13	User-defined Value 1 (correspond to max. frequency)			Unit: 1
	Settings		0 to 9999	Factory Setting: 0

This parameter corresponds to max. frequency.

When Pr.00-13 is not set to 0, “F” will disappear in frequency mode and the right-most digit will blink. Many ranges will be changed to Pr.00.13, including potentiometer, UP/DOWN key, AVI, ACI, multi-step, JOG function and PID function.

When Pr.00.13 is not set to 0 and the frequency source is from communication, please use Pr.02-18 to change frequency setting because it can’t be set at address 2001H.

00.14	Position of Decimal Point of User-defined Value 1		Unit: 1
	Settings	0 to 3	Factory Setting: 0

It is used to set the position of decimal point of Pr.00.13.

Example: when you want to set 10.0, you need to set Pr.00.13 to 100 and Pr.00.14 to 1.

4-30 Revision August 2008, 2ELE, V1.02