Delta Electronics VFD-EL manual Parameter Explanation Settings Factory Customer

			Chapter 4 Parameters
Parameter	Explanation	Settings		Factory	Customer
				Setting
10.04	Derivative Control	0.00 to 1.00 sec		0.00
	(D)
10.05	Upper Bound for	0 to 100%		100
	Integral Control
10.06	Primary Delay Filter	0.0 to 2.5 sec		0.0
	Time
10.07	PID Output Freq	0 to 110%		100
	Limit
	PID Feedback
10.08	Signal Detection	0.0 to 3600 sec (0.0 disable)		60.0
	Time
	Treatment of the	0: Warn and RAMP to stop
10.09	Erroneous PID	1: Warn and COAST to stop		0
	Feedback Signals	2: Warn and keep operation
10.10	Gain Over the PID	0.0 to 10.0		1.0
	Detection Value
10.11	Source of PID Set	0.00 to 600.0Hz		0.00
	point
10.12	PID Feedback Level	1.0 to 50.0%		10.0
10.13	Detection Time of	0.1 to 300.0 sec		5.0
	PID Feedback
10.14	Sleep/Wake Up	0.0 to 6550 sec		0.0
	Detection Time
10.15	Sleep Frequency	0.00 to 600.0 Hz		0.00
10.16	Wakeup Frequency	0.00 to 600.0 Hz		0.00
10.17	Minimum PID	0: By PID control		0
	Output Frequency	1: By minimum output frequency (Pr.01.05)
	Selection
	PID Control
10.18	Detection Signal	1.0 to 99.9		99.9
	Reference
10.19	PID Calculation	0: Series mode		0
	Mode Selection	1: Parallel mode

Revision August 2008, 2ELE, V1.02 4-19