Pioneer DVR-520H, DVR-720H manual Language settings

The Initial Setup menu 13

DTS Out

You only need to make this setting if you connected this recorder to an AV amp/receiver (or other component) using the digital output.

• Default setting: On

Initial Setup
Basic	Digital Out	On
Tuner	Dolby Digital Out	Off
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV amp/receiver (or other connected component) has a built-in DTS decoder, set to On, otherwise set to Off. Check the manual that came with the connected component if you’re unsure whether it is DTS compatible.

Important

•If you set to On with a non-DTS compatible amp/ receiver, noise will be output when you play a DTS disc.

•When set to On, there is no analog audio output when playing a DTS DVD-Video disc.

•When playing a DTS audio CD (even when DTS Out is Off), noise is output from the analog outputs. Do not play this through your amplifier and speakers.

•When playing a DTS audio CD, make sure that Stereo is selected using the AUDIO button. See Switching audio channels on page 44.

96kHz PCM Out

You only need to make this setting if you connected this recorder to an AV amp/receiver (or other component) using the digital output.

• Default setting: 96kHz		48kHz
Initial Setup
Basic	Digital Out	96kHz 48kHz
Tuner	Dolby Digital Out	96kHz
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV amp/receiver (or other connected component) is compatible with high sampling rate audio (88.2 / 96 kHz), set to 96kHz, otherwise set to 96kHz 48kHz. Check the manual that came with the connected component if you’re unsure whether it is compatible with high sampling rate audio.

MPEG Out

You only need to make this setting if you connected this recorder to an AV amp/receiver (or other component) using the digital output.

• Default setting: MPEG		PCM
Initial Setup
Basic	Digital Out	MPEG
Tuner	Dolby Digital Out	MPEG PCM
Video In/Out	DTS Out
Audio In	96kHz PCM Out
Audio Out	MPEG Out
Language
Recording
Playback

If your AV amp/receiver (or other connected component) is MPEG audio compatible, set to MPEG, otherwise set to MPEG PCM. Check the manual that came with the connected component if you’re unsure whether it is MPEG compatible.

Language settings

OSD Language

• Default setting: English

Initial Setup
Basic	OSD Language	English
Tuner	Audio Language	Français
Video In/Out	Subtitle Language	Deutsch
Audio In	Auto Language	Italiano
Audio Out	DVD Menu Language	Español
Language	Subtitle Display
Recording
Playback

This sets the language of the on-screen menus and displays.

Audio Language

• Default setting: English

Initial Setup
Basic	OSD Language	English
Tuner	Audio Language	French
Video In/Out	Subtitle Language	German
Audio In	Auto Language	Italian
Audio Out	DVD Menu Language	Spanish
Language	Subtitle Display	Other
Recording
Playback

This setting is your preferred audio language for DVD discs. If the language you specify here is recorded on a disc, the recorder automatically plays the disc in that language (although this depends on the Auto Language setting—see Auto Language on page 106).

105

En