Pioneer DVR-720H Initial Setup menu, Input Line System, On Screen Display, Front Panel Display

13The Initial Setup menu

Set the date (day/month/year) and time, then press ENTER to make all the settings.

Initial Setup
Basic	Clock	Manual Clock Setting				2/2
Tuner	Input	Date	THU	01	01	2004
Video In/Out	On
Audio In	Front	Time		00	00
Audio Out	Power	Time Zone		England
Language	Remote			London
Recording	Setup
		Summer Time		On
Playback

Use the	(cursor up/down) buttons to change
the value in the highlighted field.
Use the	(cursor left/right) buttons to move

from one field to another.

Input Line System

• Default setting: 625System

Initial Setup
Basic	Clock Setting	525System
Tuner	Input Line System	625System
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Set
Recording	Setup Navigator
Playback

For standard PAL or SECAM recording, leave the input line system to 625System. When recording an NTSC or PAL–60 signal through an external input, change to 525System.

Note

•When the current input is a built-in tuner channel preset, changing the input line system will usually also affect the input line system of the AV2/AUTO START REC (INPUT 1/DECODER) input. However if the AV2/L1 In setting is set to Decoder (see AV2/L1 In on page 102), then the L2 input is affected instead.

•If when this setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel

+button then pressing DVD (also front panel) while the recorder is stopped.

•When you switch the Line Input System setting the Copy List is erased. If you switch the setting using the

+button and DVD buttons as described above, there is no confirmation, so please use with care.

•You can’t mix recordings of different TV line systems on the same disc.

•When you change this setting, the Input Colour System setting also changes (see Input Colour System on page 102).

98

On Screen Display

• Default setting: On

Initial Setup
Basic	Clock Setting	On
Tuner	Input Line System	Off
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Set
Recording	Setup Navigator
Playback

On the default setting, the recorder shows on-screen operation displays (Play, Stop and so on). Change to Off to hide these displays.

Front Panel Display

• Default setting: On

Initial Setup
Basic	Clock Setting	On
Tuner	Input Line System	Off
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Set
Recording	Setup Navigator
Playback

On the default setting, the time is shown in the front panel display when the recorder is in standby. Switch to Off to have the front panel display switch off completely when in standby.

Note

•When set to Off, the display still lights dimly in standby when setting a timer recording, or during Auto Start Recording.

Power Save

• Default setting: Off

Initial Setup
Basic	Clock Setting	Mode1
Tuner	Input Line System	Mode2
Video In/Out	On Screen Display	Off
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Set
Recording	Setup Navigator
Playback

When set to Off, signals arriving at the ANTENNA IN terminal and at the AV2/AUTO START REC (INPUT 1/ DECODER) AV connector are passed through to the ANTENNA OUT terminal and to the AV1(RGB)-TVAV connector, respectively, when the recorder is in standby.

You can cut the standby power consumption of the recorder by turning off the through function for one or both terminals:

En