Pioneer DVR-520H, DVR-720H manual Getting started, Other settings you can make

Getting started 04

Set the date (day/month/year) and time, then press ENTER to make all the settings.

Initial Setup
Basic	Clock	Manual Clock Setting				2/2
Tuner	Input	Date	THU	01	01	2004
Video In/Out	On
Audio In	Front	Time		00	00
Audio Out	Power Time Zone			England
Language	Remote			London
Recording	Setup
		Summer Time		On
Playback

Use the	(cursor up/down) buttons to change
the value in the highlighted field.
Use the	(cursor left/right) buttons to move

from one field to another.

•You can go back to the previous screen at anytime in the Setup Navigator by pressing RETURN.

7Select the TV screen type, ‘Standard (4:3)’ or ‘Wide (16:9)’.

Initial Setup
Basic	Clock TV Screen Size
Tuner	Input
Video In/Out	On	Wide (16:9)
Audio In	Front
Audio Out	Power	Standard (4:3)
Language	Remote
Recording	Setup
Playback

Use the	(cursor up/down) buttons to select, then
press ENTER.

8Is this recorder connected to an AV amplifier/ receiver for digital audio?

Initial Setup
Basic	Clock AV Amp Digital Connect
Tuner	Input
Video In/Out	On	Connected
Audio In	Front
Audio Out	Power	Not Connected
Language	Remote
Recording	Setup
Playback

Use the (cursor up/down) buttons to select

Connected, or Not Connected, then press ENTER.

•If you select Not Connected, that completes the setup. Press ENTER to exit the Setup Navigator, or select Go Back if you want to go back and start again.

•Select the digital audio formats your AV amplifier/ receiver is compatible with.

Initial Setup
Basic	Clock AV Amp Compatibility
Tuner	Input
Video In/Out	On	Dolby Digital
Audio In	Front
Audio Out	Power	Dolby Digital,DTS
Language	Remote	PCM only
Recording	Setup

Playback

Use the (cursor up/down) buttons to select Dolby

Digital, Dolby Digital, DTS or PCM only, then press

ENTER.

•Check the operating instructions that came with your AV amplifier/receiver if you’re not sure what it’s compatible with.

9Is your AV amplifier/receiver compatible with 96 kHz PCM digital audio?

Initial Setup
Basic	Clock 96kHz PCM Compatible
Tuner	Input
Video In/Out	On	Compatible
Audio In	Front
		Not Compatible
Audio Out	Power
Language	Remote	Don't Know
Recording	Setup
Playback

Use the (cursor up/down) buttons to select

Compatible, Not Compatible, or Don’t Know, then press ENTER.

•Check the operating instructions that came with your AV amplifier/receiver if you’re not sure.

10Press ENTER to exit the Setup Navigator, or select ‘Go Back’ if you want to start again.

Initial Setup
Basic	Clock
Tuner	Input	Setup is complete!
Video In/Out	On
		Enjoy using your DVD recorder!
Audio In	Front
		Finish Setup
Audio Out	Power
Language	Remote	Go Back
Recording	Setup
Playback

That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be ready to start enjoying your DVD recorder. It’s possible, however, that you may want to make a couple of additional settings, depending on how the recorder is set up for terrestrial TV broadcasts.

•Manual channel setting – This setting lets you skip channels where there is no station, as well as manually tune to stations. See Manual CH Setting on page 100.

•VIDEO Plus+ channel setting – This setting lets you assign guide channels to ensure that the VIDEO Plus+ programming system works correctly. See Set VIDEO Plus+ CH on page 101.

•Setting up the remote to control your TV – You can set up the supplied remote control to control many brands of TV. See Setting up the remote to control your TV on page 112.

27

En