Pioneer DVR-520H, DVR-720H Copying and back-up, Copying from HDD to DVD, Canceling One Touch Copy

Copying and back-up 07

ONE TOUCH

COPY

HDD DVD

•During DVD playback, press ONE TOUCH COPY to copy the current title to HDD.

Playback starts again from the beginning of the current title. The front panel display and an on-screen display indicate that the title is being copied.

Note

•The maximum title length for copying is six hours.

•Title name and chapter markers are also copied, except when copying from a finalized Video mode disc.

•Thumbnail picture markers (Navimark) and chapter markers for the Disc Navigator are copied, but their position in the copy may be slightly changed from the original.

•If some part of the title being copied is copy- protected, copying will start, but the copy-protected portions will not be copied.

Canceling One Touch Copy

You can cancel a One Touch Copy once it’s started.

•Press and hold ONE TOUCH COPY for more than a second.

Copying is canceled and the video already copied is erased.

Note

•If you cancel a HDD to DVD-R copy, the space available for recording does not return to the pre- copy figure.

Copying from HDD to DVD*

HDD to DVD Copy All

HDD

1

HDD

Currently selected HDD title

		Title that cannot be
		added to Copy List
			HDD Groups
2	3	4	Titles in the selected
			HDD Group

			16:00 Sun 8/11
Copy List	Add		Recording Time
		DVD 1
menu options			2
	Erase
	Ttl Name
	Divide		Copy List
	Combine
	Conf List

From the HDD to DVD Copy screen you can build up a Copy List of titles to copy to DVD. From this screen you can also edit chapters so that the titles appear as you want them on your finished DVD.

* See also Copyright on page 62.

Pr 5 LP		1/3	Information for the
0h32m55s
			selected title
3	4
			Copy List titles
Total 1h30m		1/2
			Running time of the
			Copy List

Important

•The recorder can only store one Copy List at a time.

•The Copy List is erased if the Frame Accurate setting is changed in the Initial Settings menu (see Frame Accurate on page 108), or if the Input Line System setting is changed (see Input Line System on page 98).

63

En