JVC GR-DVM90 specifications 46 EN, To cancel E-Mail Clip Recording

46 EN	PLAYBACK Advanced Features For Video (cont.)
START/STOP Button		E-Mail Clip Recording
		You can make video clips from recorded video footage
	POWER	and store them in a MultiMediaCard as files which can be
	Switch	conveniently sent via e-mail.
		Load a MultiMediaCard ( pg. 14) and cassette
	Lock Button	1 ( pg. 12). Set the POWER Switch to “	” while
		pressing down the Lock Button located on the switch.
		2 Press 4/6to start video playback.
		Press E-MAIL CLIP REC. “E-MAIL CLIP STAND-BY”
	Stop Button (5)	3 appears and the camcorder enters the E-Mail Clip
Play/Pause Button (4/6)		Record-Standby mode.
E-MAIL CLIP REC		Press START/STOP. “E-MAIL CLIP RECORDING ”
Button		4 appears.
		•The camcorder stops E-Mail Clip Recording
		automatically after approx. 20 seconds, then starts
		storing the recorded video data in the
		MultiMediaCard which takes approx. 100 seconds
		additionally. “COMPLETED” appears when it is
		complete.
		To cancel E-Mail Clip Recording . . .
		.... after step 3, press E-MAIL CLIP REC again or press 5
		to stop video playback.
Display		To view video clips stored in a MultiMediaCard . . .
		.... the video clip selected in the E-CLIP Index Screen
		( pg. 49, Index Playback) can be viewed in the LCD
E - MA I L	CL I P	monitor or viewfinder; video clips cannot be displayed
		on a connected TV.
RECORD I NG

After approx. 20 seconds or when START/STOP is pressed

E - MA I L CL I P

RECORD I NG

Storing is complete

Playback Screen

E - MA I L CL I P

RECORD I NG

COMP L E T ED

NOTES:

●Playback operation cannot be performed during E-Mail Clip Recording.

●If you press START/STOP while E-Mail Clip Recording is in progress, only the portion which is recorded before START/STOP is pressed will be stored in the MultiMediaCard.

●Also, if the end of the tape is reached during E-Mail Clip Recording, that portion will be automatically stored in the MultiMediaCard.

●If the end of the tape is reached in step 3, the E-Mail Clip Record-Standby mode will be automatically canceled.

●Refer to the instruction manual of the provided software, CardNavigator, Video Player and JVC Video Decoder.

●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the MultiMediaCard.