10 EN
Power Zoom Lever
START/STOP
Button
GETTING STARTED (cont.)
Grip Adjustment
1 Separate the Velcro strip.
2 Pass your right hand through the loop and grasp the grip.
3 Adjust so that your thumb and fingers can easily operate the START/STOP Button and Power Zoom Lever. Refasten the Velcro strip.
Lock Button
POWER Switch
MODE Dial
Diopter Adjustment
Control
Viewfinder Adjustment
1 Set the POWER Switch to “ ” while
1
pressing down the Lock Button located on the switch and set the MODE Dial to any position.
2 Pull out the viewfinder fully.
3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
Tripod Mounting
1 Align the screw on the tripod with the camera’s mounting socket. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small- sized tripod.
