42 EN
F
O
C
U
S
B
A
C
K
L
I
G
H
T
E
X
P
O
S
U
R
E
PLAYBACK
Basic Playback For Video
Rewind Button (
2
)
Fast-Forward Button (
3
)
Play/Pause Button (
4
/6)
Stop Button (5)
1
Load a tape (墌 pg. 12).
2
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch. To start
playback, press
4
/6.
•To stop playback, press 5.
•Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (VOL.) towards “+” to
turn up the volume, or towards “–” to turn down the
volume.
NOTES:
●
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off automati-
cally. To turn on again, set the POWER Switch to “OFF”,
then to “ ”.
●
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
墌
pg. 58).
●
You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
●
LCD monitor/viewfinder indications:
•
When power is supplied from a battery: the “ ”
battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “ ”
does not appear.
•
During Stop mode, none of the indications are displayed.
●
When a cable is connected to the AV OUT connector, the
sound is not heard from the speaker.
Power Zoom
Lever (VOL.)
Speaker
MENU Wheel

Still Playback:

Pauses during playback.
1)Press
4
/6 during playback.
2)To resume normal playback, press
4
/6 again.
●

If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically

engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●

When

4
/6

is pressed, the image may not pause immediately while the camcorder stabilizes the still

image.

Shuttle Search:

Allows high-speed search in either direction.
1)Press
3
for forward or
2
for reverse search during playback.
2)To resume normal playback, press
4
/6.
●

During playback, press and hold

2

or

3

. The search continues as long as you hold the button.

Once you release it, normal playback resumes.

●

A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Frame-By-Frame Playback:

Allows frame-by-frame search.
1)Engage Still Playback.
2)Rotate the MENU wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse
Frame-By-Frame Playback during Still Playback.
䡲To resume normal playback, press
4
/6.
●

You can also use the provided remote control for Frame-By-Frame Playback (

墌

pg. 68).

Slow-Motion Playback, Playback Zoom and Playback Special Effects

Available only with the remote control (provided) (墌 pg. 68, 69).
POWER Switch
Lock Button