![](/images/new-backgrounds/1318396/31839667x1.webp)
34 EN RECORDING Advanced Features For Video And D.S.C. (cont.)
MENU Wheel
START/STOP Button
POWER Switch
Lock Button
Operation
Switch
SNAPSHOT Button
Self-Timer
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.
1 Set the Operation Switch to “
” and set the POWER
Switch to “ ” while pressing down the Lock Button located on the switch, then pull out the viewfinder or open the LCD monitor fully.
•You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while self- recording with the viewfinder pushed back.
2
3 Rotate the MENU wheel to select “ ”, and press it.
Display
MANUAL MENU
1RE TURN |
| |
D I S | OF F | |
SEL F – T I MER |
| |
5S |
| ON |
T EL E MACRO |
| |
W I DE MODE |
| |
W I ND CUT |
| |
F LASH |
| |
F LASH AD J . |
|
Menu Screen
4 Rotate the MENU wheel to select
5 To engage the
OR
Press SNAPSHOT. After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder
6 To end ”.
NOTE:
If “BEEP/TALLY” is set to “OFF” ( pg. 29), the beep does not sound and the tally lamp does not light.
When START/STOP or SNAPSHOT is pressed, the tally lamp changes as shown:
Begins blinking | 4 Blinks quickly |
| starts soon) |
|
|
Turns off
4snapshot recording starts)
Stops blinking and stays on
4
4
After approx. 15 sec.