JVC GR-DVM90 specifications 64 EN, Dubbing Images Stored In a MultiMediaCard To a Tape

64 EN DUBBING (cont.)

POWER Switch

Lock

Button

Dubbing Images Stored In A MultiMediaCard To A Tape

SNAPSHOT Button

Fast-Forward Button (3)

Rewind Button (2)

Images can be dubbed from a MultiMediaCard to a tape.

1 Load a MultiMediaCard (
pg. 14) and cassette (
pg. 12).

2 Set the POWER Switch to “” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

3 To locate the point where you wish to dub a still

2

image, play back the tape. Stop playback at the desired point.

4 Set the POWER Switch to “ MEMORY ” while pressing PLAY 3

down the Lock Button located on the switch. To select a still image to be dubbed, perform Index Playback (
pg. 49), Auto Playback (
pg. 47) or press 2or 3to select the image you wish.

5 To engage Dub-Standby, press SNAPSHOT. The message “TO COPY TO TAPE PUSH "SNAPSHOT"” appears.

	Display
TO COPY TO TAPE
PUSH	" SNAPSHOT "

6 While the message is being displayed, press SNAPSHOT again. The selected still image is recorded on the tape for approx. 6 seconds.

•The indicator disappears when dubbing is complete.

NOTES:

●If SNAPSHOT is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.

●The XGA image is dubbed onto the tape at 720 x 480 pixels.

●You can superimpose a print frame over the selected still image to be dubbed (
pg. 53) and dub it to a tape. After step 4, superimpose a print frame over the still image and go to step 5.