JVC GR-DVM90 specifications 60 EN, Connection To a Personal Computer

Make sure the camcorder and PC are turned off.

60 EN CONNECTIONS Advanced Connections

PC with DV
connector-equipped
capture board	PC

To DV	To
connector	RS-232C
Core filter	PC connection
	cable (provided)
DV cable
(optional)

Core filter
To DV	To PC
IN/OUT
Open the
connector
cover.

POWER Switch

Lock Button

Connection To A Personal

Computer

This camcorder can transfer still images to a PC by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector-equipped capture board installed.

1

2 Connect the camcorder or Docking Station to your PC using the appropriate cable as shown in the illustration.

•To attach the camcorder to Docking Station, refer to “Docking Station Attachment” on pg. 58.

3 Turn the camcorder’s POWER Switch to “” while pressing down the Lock Button located on the switch and turn on the PC.

NOTES:

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (
pg. 9).

●Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the provided Software.

●Also refer to the manufacturer’s instruction manual for the DV connector-equipped capture board.

●When using a DV cable, be sure it has a core filter attached. The core filter reduces interference.