JVC GR-DVM90 specifications Dual Shooting, Mode Dial to

26 EN RECORDING Advanced Features For Video And D.S.C. (cont.)

POSU	RE
EX
T		FOCUS
H	F	Button
G	C
L
I	O
K	U	(3)
A	S
C
B

MENU Wheel

POWER Switch

Lock Button

Operation

Switch

MODE Dial

SNAPSHOT Button

Video image

Released position

Half-pressed

position

Still image

Fully-pressed

position

Dual Shooting

Lets you record images on a tape and store still images in a MultiMediaCard simultaneously. In other words, it is possible to store still images in the MultiMediaCard without interrupting image recording on the tape.

Set the POWER Switch to “			” while pressing
1 down the Lock Button located on the switch and the
MODE Dial to “	DUAL	” . Pull out the viewfinder fully

or open the LCD monitor fully.

2 While recording to a tape, press SNAPSHOT halfway. A still image is displayed in the lower right corner of the screen where the video image being recorded is displayed.

•At this moment, if you release SNAPSHOT, snapshot recording will be canceled.

3 Press SNAPSHOT fully. The displayed still image is stored in the MultiMediaCard.

NOTES:

●If SNAPSHOT is pressed in the Record-Standby mode, only a still image is stored in the MultiMediaCard. Video recording does not take place.

●If SNAPSHOT is pressed when “DIS” is set to “ON” (
pg. 30), the Stabilizer will be disabled.

●The Stabilizer is less effective in the DUAL mode than in other modes.

●The flash is disabled during video recording.

●Still images are stored in the MultiMediaCard in VGA mode file size (
pg. 17).

●When the MODE Dial is set to “DUAL”, all Fade/Wipe Effects and some Program AE with special effects cannot

be used (
pg. 36 – 38).