Pioneer DVR-520H Using other types of audio/video output, Using the supplied audio/video cable

Connecting up 02

Using other types of audio/video output

If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video output.

Using the supplied audio/video cable

Using the S-video output

	AUDIO
	INPUT
	VIDEO
	INPUT
	TV
2	1
ANTENNA

	AUDIO
	INPUT
2	TV

S-VIDEO

INPUT

1

OUT	IN					AC IN
R	L
AUDIO	VIDEO	S-VIDEO	AV 1 (RGB) - TV	AV 2/AUTO START REC	IN	OPTICAL
	OUTPUT			(INPUT 1/DECODER)	CONTROL	DIGITAL OUT

ANTENNA

OUT IN AC IN

R L

AUDIO	VIDEO	S-VIDEO	AV 1 (RGB) - TV	AV 2/AUTO START REC	IN	OPTICAL
	OUTPUT			(INPUT 1/DECODER)	CONTROL	DIGITAL OUT

1Connect the VIDEO OUTPUT jack to a video input on your TV.

Use the yellow jack of the supplied audio/video cable for the video connection.

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

Use the red and white jacks of the supplied audio/video cable for the audio connection. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

1Use an S-video cable (not supplied) to connect the S-VIDEO OUTPUT to an S-video input on your TV, monitor (or other equipment).

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

You can use the supplied audio/video cable, leaving the yellow video plug disconnected. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

15

En