Delta Electronics VFD-EL manual Parameter

			Chapter 4 Parameters
Parameter	Explanation	Settings		Factory	Customer
				Setting
07.02	Torque	0.0 to 10.0		0.0
	Compensation
07.03	Slip Compensation	0.00 to 10.00		0.00
07.04
	Reserved
07.09
	Accumulative Motor
07.10	Operation Time	0 to 1439 Min.		0
	(Min.)
	Accumulative Motor
07.11	Operation Time	0 to 65535 Day		0
	(Day)
07.12	Motor PTC	0: Disable		0
	Overheat Protection	1: Enable
07.13	Input Debouncing	0~9999(*2ms)		100
	Time of the PTC
	Protection
	Motor PTC
07.14	Overheat Protection	0.1~10.0V		2.4
	Level
	Motor PTC
07.15	Overheat Warning	0.1~10.0V		1.2
	Level
	Motor PTC
07.16	Overheat Reset	0.1~5.0V		0.6
	Delta Level
	Treatment of the	0: Warn and RAMP to stop
07.17	Motor PTC	1: Warn and COAST to stop		0
	Overheat	2: Warn and keep running
Group 8 Special Parameters
Parameter	Explanation	Settings		Factory	Customer
				Setting
08.00	DC Brake Current	0 to 100%		0
	Level
08.01	DC Brake Time	0.0 to 60.0 sec		0.0
	during Start-Up

Revision August 2008, 2ELE, V1.02 4-15