TV OPERATION
1
Press the POWER button to turn on the TV; the POWER indicator will light green.
2OPTIONS
If using a
TV: VHF/UHF antenna.
If using Cable CATV: TV.
Select the TV or CATV option as described on page 17.
3
1 
2
Adjust the volume level by pressing the VOLUME Up or Down button. The volume level will be indicated on❶the screen❷by green bands and a green numerical display between 0 and 24 where 0 is the lowest setting and 24 is the loudest.
NOTES:
• When TV/CATV option is set to TV, only channels up to 69 can be selected. When set to CATV, channels up to 125 can be selected.
• If an invalid channel is selected, the display will revert to the original channel.
4
1 
2
3
For proper operation, before selecting channels, they
Pressmu t beandsetreleaseinto thetheTV’sCHANNELprogramUpmemory,or Downsee pagebutton22. The TV automatically stops at the next1 channel2set into memory. This will not operate if channels are not set into memory.
UseDir cttheseProgrambuttonsSelectionto select buttoa channels (0. The- 9) channel number will appear at the top right corner of the screen.
• Select a channel using the Direct Channel Selection buttons and the channel will change in approximately two seconds3 .
FAQs:
TV/CATVWhy do I optionnly receivemust be69 setchannels,to CATVwhenwhenmyusingcablecable,go s seemuchpagehigher?17. YouWhymustare somesubscribechannelsto thesescrambled?channels through your cable company.
24
