Memorex MVD4540B owner manual Playback connections, Connect to a TV with Audio/Video Output

Playback connections

The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

Connect to a TV with Audio/Video Output

You can enjoy playback by connecting the unit to a TV.

Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable.

TV

Video Output

DVD/VCR

Audio (L) Output	To Video	To Audio (R) Input
	Input	To Audio (L) Input
Audio (R) Output
	AUDIO/VIDEO cable (supplied)

Connect to a TV with S-Video Output (for DVD/CD playback)

If your TV has an S-VIDEO input, you can get higher quality by connecting it with the S-VIDEO output of the unit using the S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit.

TV

S-Video cable (not supplied)

DVD/VCR

		To S-Video
		Input
S-Video Output		To Audio (R) Input
	Audio (L) Output
S-VIDEO/COMPONENT		To Audio (L) Input
Video selector switch	Audio (R) Output	AUDIO cable (not supplied)

Connect to a TV with Component Video Output (for DVD/CD playback)

You can enjoy high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the COMPONENT video cables (not supplied).

TV

DVD/VCR

To Component	To Component Video Input
Video Output	COMPONENT VIDEO cable (not supplied)

NOTES:

•When you connect to a TV with S-video jack or component jacks, set the S-VIDEO/COMPONENT Video selector switch to the desired position. You must also select the corresponding video input on your TV.

•When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the display window is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals and you cannot see any picture. To turn off the PROGRESSIVE indicator, make the Progressive scanning mode inactive (see page 52).

•When the component video input jacks on a TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack (not supplied).

16

2C51001AE (16-19) 16 18/11/03, 2:38 PM