Memorex MVD4540B owner manual Timer recording, Set the start time, end time, channel

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

POWER	EJECT	OPEN/	VCR/DVD
		CLOSE
1	2	3	DISPLAY/CALL
4	5	6	INPUT SELECT/
			PROGRESSIVE
TRACKING/			TRACKING/
SET			SET
–			+
	SELECT/
	ENTER
	CH
DVD MENU	SETUP/	CLEAR/	RETURN
	VCR MENU	CANCEL
MARKER	ZOOM	TOP MENU REPEAT A-B
AUDIO/	JUMP /	ANGLE/	CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER
TIMER REC	SUB TITLE/	PLAY MODE/	TV/VCR
	ATR	SPEED

NOTES:

•If the clock symbol() blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.

•During timer recording standby mode, the VCR mode cannot be selected. To use the VCR, press TIMER REC at first, then press VCR/DVD to change to VCR mode. After you use the VCR, press TIMER REC again to put the VCR into timer recording standby mode.

•If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again.

•After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power. In this case, reset the clock (see page

19)and reprogram any timer recordings.

Timer recording

Preparation:
• Press VCR/DVD to select the VCR mode.
Load a cassette tape with the erase prevention tab intact.
				ENGLISH
Example: Program a timer recording for the 26th day, channel 125
• Press the CALL button to verify that the time and date are
correct (see page 27).
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).
Press VCR MENU. Select the		MENU
1 “TIMER REC SET” option , then		AUTOTIMERREEATRECSET	ONOFF
		AP
press ENTER.		CHSETUP
2 Press SET + or – to select one of the	·	DATE+/SYSTEM-/ENTER/MENUSSETUPTART	ÒENDCH–
program line, then press ENTER.
	·26(DATE+/-S/EUNTE)RS/TCAARTNCEL/MENENDCUHÒ
3 Press SET + or – to select the date,	·26(SUDATE+/-/ENTE)1RS1/T:CA0A0RTPMNCEL/MEN1E1ND:30PMCU125HÒ SLP
then press ENTER.
4 Set the start time, end time, channel
and tape speed as in step 3.	·+/-/ENTER/CANCEL/MENUÒ
NOTES:
• Press CANCEL to move cursor backward
for correction.
• To record from external source set the	26(SUDATE)1S1T:0A0RTPM1E1ND:30PMC125HSLP
channel to “L”. “L” will appear next to CH
125 (or 69).
5 To enter other programs, repeat step
2 through 4.	·+/-/ENTER/CANCEL/MENUÒ
• To return to the normal screen,
press VCR MENU twice.

6 Press TIMER REC. The clock symbol() will appear on the display and the VCR stands by for recording. At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the Timer recording mode. If you do not use the DVD, turn the power off.

The timer recording will start at 20 seconds before the time you predetermined.

NOTES:

• If the clock symbol( ) does not appear on the display in spite of the pressing of TIMER REC, the cassette may not have been loaded yet. (see page 22)

•If the cassette is ejected in spite of the pressing of TIMER REC, the erase prevention tab of the cassette may have been

removed. (see page 22) 29

2C51001AE (26-31) 29 18/11/03, 2:38 PM