Memorex MVD4540B Duplicating a video tape, Connection with second Video recorder, Pause/Still

Duplicating a video tape

Duplicating a video tape

If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

1 Load a blank cassette tape with the erase preven- tion tab intact into the recording VCR.

Load a previously recorded tape into the playback VCR or CAMCORDER.

2 Press SPEED to select the desired tape speed SP or SLP.

It is recommended that you set the Speed to the SP mode on the recording VCR for best results.

3 Press INPUT SELECT to select AUDIO/VIDEO in- put position. “L” will appear in the

display.

Connection with second Video recorder

Playback VCR

To VIDEO OUT To AUDIO (R) OUT

To AUDIO (L) OUT

AUDIO/VIDEO Cord (supplied)

Recording VCR

4 Press REC/OTR on the recording VCR, then press

PAUSE/STILL.

5 Press the PLAY button on the playback VCR or CAMCORDER, then press the PAUSE/STILL but- ton.

6 Release the recording pause and the playback still simultaneously to begin the duplicating process.

Connection with Video camera

Playback Camcorder

To AV Jack

Recording VCR

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN AUDIO/VIDEO Cord (not supplied)

To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

32

2C51001AE (32-33) 32 18/11/03, 2:38 PM