Memorex MVD4540B owner manual Special playback, Speed Search Times

Special playback

Picture Search

Reverse picture search function

Press REW x 1 or x 2 during the playback.

Forward picture search function

Press F.FWD x 1 or x 2 during the playback. To return to playback: Press PLAY.

SPEED SEARCH TIMES

TAPE SPEED	PICTURE SEARCH SPEED
	PRESS ONCE	PRESS TWICE
SP (Standard Play)	3 X	5 X
LP (Long Play)	7 X	9 X
SLP (Super Long Play)	9 X	15 X

Still Picture

Press PAUSE during playback. To resume normal playback: Press PLAY.

Slow Motion

During playback press SLOW.

To return to playback: Press PLAY or SLOW.

Slow tracking and vertical lock adjustment

If noise bars appear in the picture during slow motion, press the TRACKING + or – to reduce the noise bars. If the still picture jitters excessively, press TRACKING

+or – to stabilize the still picture.

Frame by Frame picture

Press PAUSE during playback.

Press SLOW one by one: The picture advances frame by frame.

To return to playback: Press PLAY or PAUSE.

Adjusting tracking condition

Automatic tracking adjustment

Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises satisfactorily during playback, press TRACKING +/– to eliminate the noises. “MANUAL TR.” will appear. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.

•Press ATR to reactivate automatic tracking again. “AUTO TR.” will appear.

NOTES:

•The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and SLOW MOTION.

•During picture search mode there will be noise bars which are caused by the system.

•The Special Playback will automatically change to playback after approx. 5 minutes to protect the video tape against excessive wear.

24

Repeat playback

The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated.

1 Press VCR MENU. Press SET + or – to select

AUTO REPEAT.
2 Then press ENTER to		MENU
select “ON” or “OFF”.		TIMER REC SET	ON	OFF
If “ON” is selected, the		AUTO REPEAT
		SAP	ON	OFF
playback will be		CH SETUP
		SYSTEM SETUP
repeated endlessly.
		〈+/-/ENTER/MENU〉
3 Press VCR MENU until the menu screen is
cleared.
if you press CALL, “	” will appear on the screen.

4 To start the playback, press PLAY.

The playback will be repeated endlessly.

To cancel repeat mode:

Follow the above step 1, then press ENTER to select the OFF position. Press VCR MENU to return to the TV.

2C51001AE (20-25) 24 18/11/03, 2:38 PM