Memorex MVD4540B Stereo recording and playback, Second Audio Program SAP, Output selection

Then press VCR MENU until the menu screen is cleared.

Stereo recording and playback / Second Audio Program (SAP)

Stereo recording and playback

The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.

OPEN/

POWER EJECT CLOSE VCR/DVD

1	2	3	DISPLAY/CALL
4	5	6	INPUT SELECT/
			PROGRESSIVE
7	8	9	0
	CH
TRACKING/			TRACKING/
SET			SET
–			+
	SELECT/
	ENTER
	CH
DVD MENU	SETUP/	CLEAR/	RETURN
	VCR MENU	CANCEL
MARKER	ZOOM	TOP MENU REPEAT A-B
AUDIO/	JUMP/	ANGLE/	CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER
TIMER REC	SUB TITLE/	PLAY MODE/	TV/VCR
	ATR	SPEED

REW/SEARCH PLAY SEARCH/F.FWD

INDEX/SKIPSTOP SKIP/INDEX

REC/OTR SLOW PAUSE/STILL

NOTES:

•When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

•When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural.

When a MTS STEREO broadcast is received, the word STEREO will ap-

pear on the screen and the program can STEREO be viewed or recorded in stereo.

The Hi-Fi STEREO recording procedure is the same as for normal recordings.

NOTE:

When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word “STEREO” will not appear and the sound will be in mono.

Output selection

When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The “R” and “L” positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.

OUTPUT	SOUND HEARD ON BOTH
SELECTION	SPEAKERS
STEREO	STEREO
L ch	LEFT CHANNEL AUDIO
R ch	RIGHT CHANNEL AUDIO
MONO	MONO

Second Audio Program (SAP)

Your VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.

This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1 Press VCR MENU. Then press SET + or – to select “SAP”.
2 Then press ENTER to select “ON”.		AUTOTIMERMENUREEATRECSET	ONOFF
		AP
		CHSETUP
	·	+/SYSTEM-/ENTER/MENUSETUPÒ

Listening to SAP

When the VCR is turned on or a channel selection is made, make certain the letters “SAP” appear on the screen. This means that the “Second Audio Program” broadcasting is available.

STEREO SAP SAP

OR

ENGLISH

31

2C51001AE (26-31) 31 18/11/03, 2:38 PM