Memorex MVDP1077 manual Audio Setup Menu, Audio Output, Video Setup Menu, Contrast, Brightness

				SETUP MENU (CONTINUED)
	AUDIO SETUP MENU:
	Press the SETUP button to enter the Setup menu, select the Audio icon using the Navigation
	(√,®) buttons, then press the Navigation (†) button to select it. Select/change the Setup option
	as described on page 17.
AUDIO OUTPUT					SPDIF/OFF: No signal output for the coaxial output
	1
					port.
		AUDIO SETUP			SPDIF/RAW: Select when Dolby Digital, MPEG
			SPDIF/RAW		recording systems are used for the disk; the output
		AUDIO OUTPUT SPDIF/OFF			and coaxial output port of the device will output digital
			SPDIF/PCM
		EXIT SETUP			(source code format) signals.
					SPDIF/PCM: Select to hear the Digital Output in PCM
					format.

VIDEO SETUP MENU:
Press the SETUP button to enter the Setup menu, select the Video icon using the Navigation
(√,®) buttons, then press Navigation (†) button to select it. Select/change the Setup option as
described on page 17.	CONTRAST
BRIGHTNESS
1	1

	VIDEO SETUP								12		VIDEO SETUP			12
		BRIGHTNESS							10						BRIGHTNESS		10
							8									8
		CONTRAST							6						CONTRAST		6
		HUE							4						HUE		4
		SATURATION							2						SATURATION		2
		EXIT SETUP							0						EXIT SETUP		0
Set to the desired brightness. The higher												Set to the desired contrast. The higher
the number, the brighter the picture.												the number, the deeper the contrast.
HUE												SATURATION
1												1
			VIDEO SETUP			+6								VIDEO SETUP				12
				BRIGHTNESS						+4					BRIGHTNESS			10
				CONTRAST						+2					CONTRAST			8
								0										6
				HUE						-2					HUE			4
				SATURATION						-4					SATURATION			2
					EXIT SETUP					-6		Set to			EXIT SETUP			0	12).
													the desired saturation (0 to
Set to the desired hue (+6 to –6).											20