ONE-TOUCH TIMER
RECORDING (OTR)
The
EXAMPLE:
1Press the POWER button to turn on the TV/VCR.
2Load a video cassette with the erase prevention tab in- tact.
3Press the SPEED button to select the desired tape speed (SP or SLP). SP or SLP will appear on the screen.
|
|
| 00:00:00 SP |
4 Set the TV/CABLE option to the | |||
appropriate setting (See page 15). | |||
|
|
|
|
| TV | - VHF/UHF channels |
|
| CABLE | - CABLE TV channels |
|
5Press the Direct Channel Selection buttons or CH M/ ? button to select the channel to be recorded.
6Press the REC/OTR button to
begin recording. Press the button | OTR 0 : 30 |
again to stop recording after 30 | CH 012 |
| |
minutes. Each additional press of |
|
the REC/OTR button will increase |
|
recording time as shown below, | INDEX |
| |
up to a maximum of 6 hours. |
|
“OTR” will appear on the screen. |
|
TIMER RECORDING | |
| |
3 Press the ▲ or ▼ button to | |
press the ENTER button. |
|
select the program position, then |
|
4Press the B or A button to select
the date, then press the ▼ button. | CH |
|
TIMER REC SET
DATE 23(THU)
START 8:30AM
END–
CH 012
SPEED SP
/
/
/
/ MENU
5Set the start time, end time, channel and tape speed as in
CHstep 4, then press ENTER.
TIMER REC SET | ||||
| DATE | 23(THU) |
| |
| START | 7 : 00PM |
| |
| END | 9 : 30PM |
| |
| CH | 007 |
|
|
| SPEED | SLP |
|
|
/
/
/
/ ENTER/MENU
6 | To set the timer for another program, press the ▲ or ▼ |
| button until the number of the second program |
| highlighted, then press the ENTER button. Repeat |
| steps 4 to 5 to set the second program. |
7 | Press the TIMER REC button. The |
ENGLISH
NOTES: • Press the REC/OTR button to increase the time needed for recording (See the chart right).
•To cancel OTR, press the STOP button.
•The TV/VCR channel cannot be changed during recording.
Press | Recording time |
once | NORMAL REC |
twice | 0:30 |
3 times | 1:00 |
4 times | 1:30 |
5 times | 2:00 |
|
|
6 times | 3:00 |
7 times | 4:00 |
8 times | 5:00 |
9 times | 6:00 |
10 times | NORMAL REC |
will light. The Timer is programed, when the programed |
time is reached, the recording is automatically started. |
To cancel timer recording, press the TIMER REC button again and
NOTES: • If programming is performed without a tape in the TV/VCR, or with a tape without an erase prevention tab, the Timer Recording is not possible. If a tape without an erase prevention
TIMER RECORDING
Timer recording can be programmed
EXAMPLE: Program a timer recording for 23rd day, channel
007 (CABLE), 7:00 - 9:30 PM (Tape speed : SLP).
•Load a video cassette with the erase prevention tab intact. The TV/VCR will automatically turn on.
•Set the TV/CABLE selection to the appropriate position (See page 15).
1Press the MENU button.
Press the B or A button to select |
| CH | |
|
| ||
the | option. | AUTO REPEAT | ON |
|
| TIMER REC SET |
|
2Press the ▲ or ▼ button to select
the TIMER REC SET option, then 
/
/
/ MENU press the A button.
tab is in the TV/VCR, the tape will be ejected.
•To record from the external equipment press the B or A button repeatedly until “L” (LINE: from AUDIO/VIDEO IN jack on the front) appears when setting the channel in step 5.
•The VCR section cannot be used while the
•After a power failure or disconnection of the power plug, all programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see page 13) and reprogram any timer recordings.
•If you want to correct the digits while setting, press the ▲ or ▼ button until the item you want to correct, then press the B or A button to correct the desired setting.
21
5M10421A E | 21 | 26/5/04, 10:45 |
