14.7.14 CLEARING MEMORY
14.1Main menu selection
Select from the main menu by means of the left/right arrow keys: CLEAR MEMORY
14.2Confirmation
Since this is a potentially hazardous program (it will erase all programming) after pressing ENTER the display will show: ARE YOU SURE ?
PRESS < TO CLEAR
Only the left arrow key will proceed with clearing; any other key will return to the main menu without clearing the memory.
1 4
SELECT PROGRAM :
CLEAR MEMORY
1
2
ARE YOU SURE ?
PRESS < TO CLEAR
3
CLEARING MEMORY
PLEASE WAIT
4
POWER - ON - DELAY
5
MEMO RY CLEARED
SYSTEM IS DOWN
14.3Wait display
After pressing the ENTER key, the display will show that clearing memory is in advance.
14.4Power-on delay
14.5System down
When the memory is cleared the display will show that the SM30 system is down. The installer programming password must be re- entered, and the setup program run, in order to continue.
14.7.15 ALARM MODE
Alarm signals activated by a control input can be interrupted by a Call Station with higher priority. When the overruling call ends, the alarm signal will return and continue till the end of the signal.
15.1Main menu selection
Select from the main menu by means of the left/right arrow keys: CTL ALARM MODE
SELECT PROGRAM :
CTL ALARM MODE
1
2
CT L ALA RM MODE
NON - INTERRUPT
3
CTL ALARM MODE
INTERRUPTABLE
Clear Memory | Control Alarm Mode |
10
