Philips SM30 manual Flexible F-keys

15.2Current mode display

The display will show the current mode.

15.3Mode selection

Selection of the non-interruptable or interruptable mode can be made using the up/down arrow keys.

14.7.16FLEXIBLE F-KEY PROGRAMMING

This program step provides flexible programming of the F-keys (F1, F2, F3 or F4) of a Call Station.

After pressing the flexible programmed F- key on the Call Station, the pre- programmed zone selection can be temporarily changed by means of the numeric keypad on the Call Station. Pressing the F-key next time, the originally pre-programmed zones will be selected again.

Example:

F1-key: flexibly programmed, pre- programmed with message 1 routing to zones 1, 2 and 3.

F2-key: pre-programmed with message 2, routing to zones 4, 5 and 6.

If the F1-key is pressed, the zone LEDs 1, 2 and 3 will light to indicate the pre- programmed routing. If you want to route message 1 to other zones, adding or deleting of zone numbers is done by means of the numeric keys. Pressing the ‘Press-To-Talk’ key will broadcast the message 1 to the actually selected zones.

If the F2-key is pressed, the zone LEDs 4, 5 and 6 will light to indicate the pre- programmed routing, but no additional zone selection is possible. Pressing the

‘Press-To-Talk’ key will broadcast message 2 to zone 4, 5 and 6.

16.1Main menu selection

Select from the main menu by means of the left/right arrow keys:

FLEXIBLE KEYS

16.2Selection Call Station number

Select the number of the Call Station by means of the up/down arrow keys.

16.3Activation flexible F-key

Activate the flexible function of an F-key by means of the ‘’ key. If necessary, deactivate the flexible function by means of the ‘O’ key.

1 6

S E L E C T P R OG R A M :

F L E XIB L E F K E Y S

1

SELECT ITEM :

CALL STATION : X

2

3

CS T X F K E Y S : 1 234

F L E X. F UNCT. 1000

Flexible F-keys

11