Philips SM30 manual Microphones, Programming next microphone

	2
	SELECT PROGRAM :
	MICROPHONES
1
2
	SELECT ITEM :
	MICROPHONE : X
3	MICROPHONE : X
	PRIORITY : X
4
	MICROPHONE : X
	SIGNAL : XX
5
	MICROPHONE : X
	MESSAGE : X
6
	MICROPHONE : X
	000000	ZONE : 01
7
	MICROPHONE : X
	XX0000	REL : 03
Microphones

2.7Programming Control Relays

This display will be skipped if the Control Relay Module is not present in the system. The current setting of Control relays 1-6 is shown. Shifting the cursor to the right, further than the last position, will display the current setting of relays 7-12. Selecting a zone can be done with the ‘’ key. Deselecting a zone can be done with the ‘O’ key. Relay 1 (marked ‘X’) is reserved for the activation of internal system error indicators and cannot be programmed for any other function. Relay 2 (marked ‘X’) is reserved for the activation of Call Station error indicators and cannot be programmed for any other function. Relay 3 is dedicated to the ‘Delayed Power On’ function, but may be used for other functions if Power On Delay is not used. If it is used, the third position will be marked with an ‘X’ in the display.

Programming next microphone

When programming of the first microphone is completed, pressing ENTER returns to the next microphone number to be programmed.

41