Mercury PR0091 From Resource Data Management, Description, Configuration, Display value, Type M

Mercury 6-5 Stat – Installation & User Guide

The Mercury Range

From Resource Data Management

This documentation refers to the Mercury 6-5 - 5 Channel Thermostat

Description

The Mercury 5 Channel Thermostat has 5 thermostat functions. They can be configured for independent use, where each function is controlled by an individual probe or the controller can be configured to operate selected thermostats from one temperature probe. Each channel can be individually configured for heating or cooling applications with a selection of parameters. There is a 7-day timer with two on and off’s. Included in the controller is a frost detect parameter. This over-rides the timer function, when the timer is off, to begin heating should the channel probe reach the frost detect value. The controller has the ability to use any of the channels to operate as a timer. Each input can also accept over-ride commands as detailed later in the user guide. Note:- the over-ride commands work only on channels selected as a thermostat, it has no effect if a channel is set to operate as a timer.

The 5 Channel Thermostat can operate stand-alone or it can be networked through either an "IP" network module or a Mercury IP Hub. The 5 Channel Thermostat supports PT1000 or NTC2000 or NTC2k25 temperature probes (note all 6 inputs are either PT1000 or NTC2000 or NTC2k25)

Configuration

There is one type of controller within the 5 Channel Thermostat (Type 1)

Display value	Type M
1	5 Channel Thermostat

Network

The controllers are capable of connecting to a TCP/IP local area network or controlling in standalone mode with no network output.

To connect to a network you must add the correct communications module.

•IP Futura module - (Part No PR0016)

•Mercury IP Hub - (Part No PR0018)

Ensure that all power is
switched off before
installing or maintaining
this product	Revision 1.2	Page 3 of 21