Mercury
Fuse:
The host equipment must provide a suitable external
Fuse: | 6.3A, 240 Vac Antisurge (T) HRC conforming to IEC 60127 (Relay 4 & 5 fully loaded) |
Or MCB: | 8A, 240 Vac Type C conforming to BS EN 60898 (Relay 4 & 5 fully loaded) |
Cleaning:
Do not wet the controller when cleaning. Clean the front by wiping with slightly damped lint free cloth.
Please note: The specifications of the product detailed on this set up guide may change without notice. RDM Ltd shall not be liable for errors or for incidental or consequential damages, directly or indirectly, in connection with the furnishing, performance or misuse of this product or document.
Ensure that all power is |
|
|
switched off before |
|
|
installing or maintaining |
|
|
this product | Revision 1.2 | Page 20 of 21 |
