Mercury
Viewing
Apart from setting up the controller, you can also view the status of the inputs and outputs.
1.IO. View Inputs / Outputs and States
a.From the function menu, select “IO”, press enter
b.You can now scroll through the IO tables as set out below. The tables you view will depend on the controller type configuration.
Input/Output table for 5 Channel Thermostat
Number | IO | Range | Step | Units |
Probe 1 | 0.1 | Deg | ||
Probe 2 | 0.1 | Deg | ||
Probe 3 | 0.1 | Deg | ||
Probe 4 | 0.1 | Deg | ||
Probe 5 | 0.1 | Deg | ||
0 (Off), 1 (On) |
|
| ||
0 (Off), 1 (On) |
|
| ||
0 (Off), 1 (On) |
|
| ||
0 (Off), 1 (On) |
|
| ||
0 (Off), 1 (On) |
|
| ||
Relay 1 | 0 (Off), 1 (On) |
|
| |
Relay 2 | 0 (Off), 1 (On) |
|
| |
Relay 3 | 0 (Off), 1 (On) |
|
| |
Relay 4 | 0 (Off), 1 (On) |
|
| |
Relay 5 | 0 (Off), 1 (On) |
|
| |
Timer | 0 (Off), 1 (On) |
|
|
Display Messages
The following messages can appear on the Mercury display.
Display
System status
on
Controller On
Ensure that all power is |
|
|
switched off before |
|
|
installing or maintaining |
|
|
this product | Revision 1.2 | Page 14 of 21 |